Securescreen care and Maintenance - Sunshine Coast

Secure Screen Sunshine Coast, Window Security Screens Bunnings Sunshine Coast, Crimsafe Security Screens Sunshine Coast, Screen Security Sunshine Coast

Blindmakers Pty Ltd warrants the owner of the Secure Screen Stainless Security Doors and windows that they are free from defects in craft and material under conditions of everyday residential use for 11 years from the installation date. Not included in this Blindmakers warranty are accessory items fitted to the door or window or labour associated with the manufacturing of the door or screen and installation. These items, such as Locks, Handles, Hinges, Door Closers, Labour etc., are independently covered by warranties supplied by the relevant manufacturer or supplier and typically not Blindmakers.

To prolong the life of the Secure Screen products and to maintain your rights under this warranty, you should follow the care and maintenance advice set out below.

This warranty is given in addition to any statutory guarantees under the Trade Practices Act 1974, which apply to all consumer transactions. Subject to any statutory rights the owner may have which may not be modified or excluded, this warranty does not apply to any damage due to matters outside the control of Blindmakers, including owner servicing, failure of the owner to follow the care and maintenance advice set out below, accident, abuse, fire, alteration of the product in any way, an act of God, failure to abide by any product warnings, or any parts or labour used to replace any parts covered under this warranty.

SecureScreen Maintenance Warranty & Care Guide

Maintenance of SecureScreen products

All powder coated materials need to be cleaned regularly to preserve the finish over the years. Therefore, the secure Screen and its framing should be cleaned at frequent intervals as indicated below, depending on the surface contamination. The cleaning operation aims to remove the grime deposited onto the surface without causing damage to the powder-coated surface.

The cleaning method depends on the degree of contamination. Complicated cleaning is often the best way for small installations. Still, large expanses of powder-coated metals, as in multi-story buildings and large commercial projects, call for carefully controlled methods to loosen deposits of dirt and grime.

The surfaces should be washed down with warm water in conjunction with car wash and wax (*recommended cleaner). Acidic or alkaline cleaners are also not recommended as they can damage the powder coating (pH ranging from 5 to 8). It is essential to finish off the cleaning by thoroughly rinsing all washed surfaces with clean water.

Aerosol paint graffiti can cause considerable problems due to solvents used in paint. Contact Home Point on 54497722 for advice and recommendations before attempting the removal of graffiti.

It is essential to note that cleansers may attack the finished surface and must not be used except in consultation with companies specialising in cleaning powder coating metal surfaces.

Definitions of environments:

Type of EnvironmentMaintenance Intervals (Max)Recommended Maintenance Treatment
Mild 6 months Warm wash with recommended cleaner*
Moderate 3 months Warm wash with recommended cleaner*
Tropical/Severe 2-4 weeks Warm wash with recommended cleaner*

Note: To successfully maintain Secure Screen, it is important to follow the care and maintenance advice to maintain your warranty. The recommended maximum maintenance intervals provided here are for general guidance only. Some installations may require extra maintenance due to local environmental conditions (proximity to industrial activity, etc.).

Nothing in these terms and conditions shall in any way exclude, restrict or modify the implied warranties under the Trade Practices Act 1974.

Have a Query?

Request a Free Measure and Quote